My Observations
1 The electrolyte particulates out about 3/16Th of an inch before the test begins.
2. Brown particulate forms about 1/4 inch during the test.
3. Foam forms on the surface and stays there during the test.
4. Gas production is quite good.
5. Some brown particulate makes its way into the foam. It doesn't appear to be of the scum variety.
6. I used quite a bit less KOH in this test than the electrolytes in other tests.
7. I suspect my batch of KOH is an inferior grade.
Electrolytes & Electrolyte Testing Articles
Next:
Previous: Grape Kool-Aid Long Term Particulate Comparison Test
2 comments:
Charlie, I am very interested in your work, I have been doing the same things as you have for 2 years now. I have managed to get my device to produce one gallon per 1.5 hours at less than 2 amps 12 volts dc. I now hope to find some method of storing the gas to use for small motors and applicances. Please contact me at donthehill at g mail dot com.
I hope to see more of your work.
Post a Comment